Shop

Home/Shop

CoGri Specialist Floor Repair and Maintenance Products Shop

With a proven track record of premium quality and delivering superior performance in the busiest warehouse and industrial environments, we also offer a range of CoGri specialist floor repair and maintenance products.

 

  • Water Based Primer
    CoGri WB Primer is a premium quality solvent free, water dispersible epoxy based primer designed for use on porous concrete substrates and to compliment COGRI HB and WB Coating systems. An extremely versatile product it can also be used as a surface sealer of clear coating to concrete industrial floors.

    Typical Properties at 20°C

    • Excellent adhesion to concrete
    • Low odour and taint free
    • Easily applied
    • Economical and versatile
     
  • High Build Coating
    CoGri High Build (HB Coating) is a high quality solvent free epoxy high build coating system, which provides protective and decorative properties to concrete industrial floors. As a waterproof, tough and chemical resistant floor coating, it is suitable for use in warehouses, distribution centres, food preparation areas and other industrial environments.This two pack system consists of pre-weighted amounts of base and curing agent. After mixing both components together, an easily applied chemical and abrasion resistant finish is produced. A slip resistant finish can be achieved by broadcasting an appropriate aggregate into the coating system.CoGri HB Coating provides excellent resistance to dilute acids, dilute alkalis, oil, petrol, vegetable oils, etc. Further information can be obtained from our Technical Department.
    • 100% Solids Epoxy Formula
    • Solvent Free, non toxic or taint
    • Suitable for forklift traffic
    • 10kg unit yields 16 – 20m² for a 2 coat application
    • Dry Film Thickness (dft) of 400-450 microns with recommended 2 coat treatment
    • Hard dry time in 12hrs at 20°C
    • Standard Mid-Grey (BS4800 or RAL colours available on request, please see colour charts on the right)
  • Water Based Coating
    CoGri (WB) Water Based Coating is a high performance, water dispersible epoxy coating system for the treatment of concrete industrial floors. It has been designed to be user and environmentally friendly, containing no solvents with minimal odour during application. It is suitable for use in warehouses, distribution centres, food factories, laboratories and other industrial areas.This two pack system consists of pre-weighted amounts of base and curing agent. After mixing both components together, an easily applied chemical and abrasion resistant finish is produced. A slip resistant finish can be achieved by broadcasting an appropriate aggregate into the coating system.CoGri WB Coating provides excellent resistance to water, dilute acids, dilute alkalis, glycol ethers, skydrol, dibasic ester solvent, etc. Further information can be obtained from our Technical Department.
    • 65% Solids Epoxy Formula
    • Solvent Free, non toxic or taint
    • Light to Medium
    • 10kg unit yields 20 – 25m² for a 2 coat application
    • Dry Film Thickness (dft) of 200 250 microns with recommended 2 coat treatment
    • Standard Mid-Grey (BS4800 or RAL colours available on request, please see colour charts on the right)
    • Matt and Gloss options
  • cogri bondcoat
    CoGri Bondcoat is used as a bonding primer for CoGri Arris Repair Mortar where the highest bond values are required. It is a two part epoxy resin system consisting of a base component containing solvent free epoxide resin plus a low viscosity hardener. The bond values achieved are greater than the tensile strength of high quality concrete. The bond lines are resistant to a wide range of chemicals to compliment the CoGri Arris Repair Mortar.

    Typical Properties at 20°C

    • Tensile Strength of 41N/mm²
    • Flexural Strength of 65N/mm²
    • Finished application can be brought into traffic use within 24 hours
    • Pot life of 1 hour

    Uses include: as a bonding primer for COGRI ARRIS REPAIR MORTAR

  • cogri lv resin
    CoGri LV Resin is the professionals choice for a solvent free, low viscosity epoxy resin designed for filling cracks and voids in concrete industrial floors. It is easy to apply and can penetrate cracks as narrow as 0.2mm wide. It has excellent bond strength to concrete, which is greater than the tensile strength of a high quality concrete.Typical Properties at 20°C
    • Very Fast Cure
    • High Strength
    • Suitable for Internal and External areas
    • Shore Hardness A75
  • CoGri Rapid Mender

    The Ulimate in Concrete Repair

    The CoGri Rapid mender is a specially formulated rapid setting polymer repair product.Its ideal for all types of concrete floor repairs including, repairs to cracks, divots, de-lamination and damaged and spalled joints.As the CoGri Rapid Mender cures in 15 minutes and can be trafficked in just 30 minutes, it offers major benefits over more traditional repair products, through minimal downtime and disruption.CoGri Rapid Mender can be used safely in freezer environments at temperatures down to -30c. Please note, setting times increase marginally with cooler temperatures.Internal and external floor slabs can be repaired using the CoGri Rapid Mender.

    Used for: Repair of floor joints to concrete industrial floor slabs, in an instant.

  • rapid seal
    The CoGri Rapid Seal is a self levelling, 100% solids, flexible two component rapid curing polyurea elastomer joint sealant.It can be used to fill control joints, new construction joints or random cracks on horizontal concrete surfaces, both internally and externally.CoGri Rapid Seal is designed to withstand heavy duty vehicular traffic, such as forklift trucks and steel wheeled material handling equipment (MHE). It is strong enough to accommodate slab movements, yet strong enough to protect the vertical edges (arrisses) of the concrete floor joint from spalling under extreme loading.We recommend CoGri Rapid Seal for repairs to cracks, damage control or construction joints in cold storage facilities, freezers and food processing plants where time and temperature are serious considerations.
  • finishing stone
    The CoGri finishing stone is ideal for providing a smooth finish to small floor repairs and delivering that professional touch.
  • Arris Repair Product
    CoGri Arris Repair Mortar is resistant to a wide range of chemicals including petroleum products. The mortar is stable to freezing and thaw.

    Typical Properties at 20°C

    • Prime with CoGri Bondcoat
    • High Strength: Compressive Strength of 105N/mm² after 7 days
    • Cures in 4 – 6 hours
    • Can be ground after initial cure
    • Pot Life of 40 minutes
    • 16kg unit yields approximately 8 litres of mixed material
  • Joint Sealant
    CoGri JS50 is a premium quality one part high modules modified polymer sealant used for the sealing of concrete floor joints in new and existing floor slabs. 

    Typical Properties at 20°C

    • Cure Rate of 2mm/24hrs
    • Can be opened to traffic within 24hrs
    • Service Temperature between -40°C to +120°C
    • Shore Hardness A55
  • Long Handled Scraper
    Specifications• 100mm wide blade• 48” total length• Weight 38kg• Heavy duty cast alloy head• High grip silicone rubber handle• 10x Replacement Blades
  • Short Handled Scraper
    Specifications
    • 100mm wide blade
    • Heavy duty cast alloy head
    • High grip silicone rubber handle
    • 10x Replacement Blades